/ Sign up

  1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

My-T-Brite C6 fault finding???

Discussion in 'Lights - Store Bought and Home Made' started by scotthorwell, Aug 17, 2013.

  1. scotthorwell

    scotthorwell New Elf

    Joined:
    Dec 2, 2012
    Messages:
    29
    Likes Received:
    0
    Location:
    Engadine
    I've searched the forum and seems a few members are using the My-T-Brite branded lights, but couldn't find anyone with issues. A few strings of C6 are not functioning, does anyone know how to fault find or is it a case of throwing them away?
     
    scotthorwell, Aug 17, 2013
    #1
  2. Benslights

    Benslights Dedicated Elf Global Moderator Generous Elf

    Joined:
    May 2, 2010
    Messages:
    2,385
    Likes Received:
    121
    Location:
    Elderslie
    Find Me On:
    have you checked the power lead?? as in most cases I tested these on a multi metre and found them to be the issue. I just replaced them and all good
     
    Benslights, Aug 18, 2013
    #2
  3. mellowcouple

    mellowcouple Full Time Elf

    Joined:
    Dec 18, 2011
    Messages:
    285
    Likes Received:
    15
    Location:
    Whyalla
    Find Me On:
    Yes I agree with yag, the only problem I had last Christmas was with a power lead, I replaced the lead and the lights worked fine.

    Ron, (mellowcouple).
     
    mellowcouple, Aug 19, 2013
    #3
  4. dale82

    dale82 Senior Elf

    Joined:
    Nov 19, 2010
    Messages:
    568
    Likes Received:
    0
    Location:
    Kingaroy
    Just email kelvin and let him know of your issue, I too have MyTBrite lights and kelvin was happy to assist where he could.
     
    dale82, Aug 19, 2013
    #4
  5. OP
    OP
    scotthorwell

    scotthorwell New Elf

    Joined:
    Dec 2, 2012
    Messages:
    29
    Likes Received:
    0
    Location:
    Engadine
    Yeah, checked lights with known working leads, but no luck. This lot I got second hand so wouldn't be comfortable going to My T Brites.
    Thanks for responses
     
    scotthorwell, Aug 19, 2013
    #5
  6. Benslights

    Benslights Dedicated Elf Global Moderator Generous Elf

    Joined:
    May 2, 2010
    Messages:
    2,385
    Likes Received:
    121
    Location:
    Elderslie
    Find Me On:
    if you have a faulty set of lights and your just plugging new leads in your may be blowing the resistor in lead. i test mine with a multi metre
     
    Benslights, Aug 19, 2013
    #6

Share This Page