I built custom pixel icicles 2 years ago and have always had what appeared to be "data" issues with them. This will flicker at weird times, work normally at others. The prop is 804 WS2811 pixels, broken up into 134 icicles that are 6 pixels in length. I built this prop in a modular manner in "bars" that can be taken down and easily stored. Each bar can be tested solo, which I am doing now, and I am finding some VERY strange things in some of the bars, not all.. I am running these on an e6804 sandevices board. there are test patterns that you can run when you plug pixels into it. 1 is all red, 2 is all green, 3 is all blue. When I wire up a bar to the board, I am running 1, which is all red. and find that the first pixel is blue, and all others are magenta. Now, if I touch the data connection on the pixels, suddenly, all pixels turn red, as they should be. if I take my finger away, they go back to 1 blue, and all magenta. I've built ALOT of pixel elements, but most are between 20 - 150 pixels. Not sure if this a symptom of a "big" build, or what. Has anyone ever experienced this??? I have no idea what is going on, or what I did wrong. Please help.