Pixlite 4 to Dmx 512 pin out

[djohnson1810]

I have a pixlite 4 that I want to run some RGB floods and dumb pixels off of the DMX 512 output. I am using some simple 3 channel controllers for the lights.


I can't wrap my head around how to wire from the 3 wire DMX512 output to the controller. Can anyone help me with the pin out to go from the pixlite to the 3 channel DMX?

 

[prof]

On the pixlite 4 the dmx terminal is labelled D+ D- and GND
This corresponds to Red Data+ Blue Data- Black GND on the 3Ch driver.
The other wiring table is for running power/data over cat5 cable to the unit.

 

[djohnson1810]

Okay. Thanks. I will try that tomorrow!

 

[djohnson1810]

Worked great. Thanks!