Pixlite & xLights

[stan780953]

Hello,

This is my first project and I'm just dabbling with it now to see how I get on.

I have created a frame for a window and a front door using WS2815's, the Windows is 192 pixels and the door is 162 and although I can get the sequence from xLights to output to each frame but I feel the setup is not quite right and would really appreciate it someone could take a look please.

Thanks,

Stan

 

[Notenoughlights]

It looks as if you have not set the IP address of the controller in xLights. Xlights doesn't know where to send the e1.31 data for that controller you have set up.

Edit: I see multicast, perhaps that is your issue. Try a direct IP address instead.

 

[merryoncherry]

I haven't used any of these products or programs but another thing I notice is you have it set to 510 pixels. There are 3 channels per pixel, so it's 510 channels/170 pixels per universe. So like in your last screenshot you're all the way to universe 12, but xLights is sending to 1-4.

 

[merryoncherry]

Also, you might have better luck taking this to a zoom room, especially US or UK given the time of day.