PixLite16 mounting holes.

[Odd_Socks]

Hi,

Can any one let me know the locations for the 4mm fixing holes on the PixLite16 board.

On page 18 of the manual it shows the spacings of the 4mm holes but not a reference distance from the top right corner of the board like the 3mm holes have.

Thanks

 

[Greg.Ca]

It sure would be really nice to have a paper or cardboard template for mounting the pixlite 16's. I would gladly pay a reasonable fee for such an item.--Greg--

 

[AussieDoug]

 

[Odd_Socks]

Hi AussieDoug,

Thanks for that, I have that image out of the manual but it does not have how far the 4mm holes are for the edges. It shows that the spacing between the holes is 75.5mm but not the distance from the top or edge of the board.

The top right 3mm hole is marked as 12mm from the top and 12mm from the edge and with that you can calculate the locations of the other five, but this information is missing for the 4mm holes.

 

[Devo]

I have attached an updated mechanical drawing with additional dimensions for the 4mm holes.

 

[Odd_Socks]

Hi Devo,

Thanks for that, just what I needed.

Love the support on here