Kurt87
New elf
Just a quick one for the gurus. I’m currently building my controller for my megatree and just had a question regarding planning for 100% brightness or not. I know ideally it would be great to over engineer the system to run at its max but I plan on only running at 30%. The only reason I’m wary is because Iv read that sometimes if there is a data issue it can default to 100% brightness therefore potentially overloading the supply and/or blow some fuses in the process. Basically what is the likelihood if I set the brightness on the actual falcon ( not xlights ) to 30% that it would corrupt. Has anyone experienced this?
My setup ...
Tree - 24 strands x 100 + ~100 for star
Controller - F16v3 w/expansion
Pixels - 12v regulated
Power - (planned) 2 x 12v LRS-350-12
Hope this makes sense. Thanks in advance
My setup ...
Tree - 24 strands x 100 + ~100 for star
Controller - F16v3 w/expansion
Pixels - 12v regulated
Power - (planned) 2 x 12v LRS-350-12
Hope this makes sense. Thanks in advance