S-200-5 Power Supply (Hanson) and Baldrick 8 - STl

[Renzo1975]

Good morning all,

Got my Baldrick 8 and S-200-5 power supply all delivered and ready to use.
Does anyone happen to have an STL for this power supply to mount the Baldrick 8 on at all?
There are STL files on the website but they seem to be meanwell.

Thank you.

 

[brother fergy]

is your a medium board?

 

[brother fergy]

i found this but it isnt an stl flie sorry https://inspirelightshows.com/product/baldrick-8-port-mount-to-meanwell-lrs-350-stl/

 

[brother fergy]

finally found an STL file for you https://www.baldrickboard.com/docs/baldrick8/baldrick8-stl-mounts

 

[brother fergy]

i also got chat gpt to generate one if that helps, sorry im talking so much

 

[XtremeEntertainment]

i found this but it isnt an stl flie sorry https://inspirelightshows.com/product/baldrick-8-port-mount-to-meanwell-lrs-350-stl/

That is an stl you just have to pay for it.

 

[brother fergy]

oh

 

[Johnnyboy]

Here you go.
there are a few other versions of mounts for various configurations.

The one for the RS-320 is from https://www.baldrickboard.com/en/fun-stuff/stls-and-mounts

The LRS-600 version is a modified version that i did.

Hope that helps

 

[AAH]

i also got chat gpt to generate one if that helps, sorry im talking so much

Is there anything special that you have to do to get chatgpt to do stuff like that? I had no idea you could do stuff like that.

 

[Renzo1975]

Hey thank you.. I did find an STL on the Baldrick 8 site but said it's for Meanwell. Mine's a SCOTT S-200-5 so i'm going to print it out and see how it goes.. I think about 2ishmm difference if I measured right so I'll report back..
Thank you for your help tho

 

[Skymaster]

Keep in mind the Baldrick 8 also has the same form factor as a Falcon SRx2 (8 port) Smart Receiver. I believe even the mounting holes are in the same location to allow you to use exactly the same mounts. @domhodgson can confirm
So, you might also want to use that in your searches rather than the Baldrick as well.

 

[brother fergy]

Is there anything special that you have to do to get chatgpt to do stuff like that? I had no idea you could do stuff like that.

I just signed up for it and asked it to create a STL file

 

[domhodgson]

Keep in mind the Baldrick 8 also has the same form factor as a Falcon SRx2 (8 port) Smart Receiver. I believe even the mounting holes are in the same location to allow you to use exactly the same mounts. @domhodgson can confirm
So, you might also want to use that in your searches rather than the Baldrick as well.

That is correct, we wanted people to be able to reuse mounts they'd already made / designed