ozstickman
New elf
G'day.
I hope this is the right spot to put this but here goes.
So far we have plans to run rgb pixels along the gutters and gable on out house along with surrounding 4 windows and a door at present. Then in the front yard starting with six meter high Xmas trees, these will also be rgb pixels.
The gutters and gable will be in three sections all facing the street. The east gutter is about 3m, the gable about 4m and the west gutter about 4.5m.
The window on the eastern end is about 8m all round, next window would be around 6, the door would be around 6m with a window each side of about 3m each.
The trees are to be spirals using a full 5m length of rgb pixels. There will be six of them and about 6 to 8m from the house.
I would like to put a singing Santa on the front wall but like to get the basics done first. The house is a Queenslander and six foot off the ground. I am looking at using the Falcon16 controller with the extra board on top for expansion and having it under the house. Running all cable from there to each rgb pixel strip. The greatest distance to a rgb pixel strip will be approx 8m. Looking at using rgb pixel strips with 30pixels per meter.
Additional items will be placed about but that hasn't been finalised yet.
Any hints and tips will be great.
Cheers
Stickman
I hope this is the right spot to put this but here goes.
So far we have plans to run rgb pixels along the gutters and gable on out house along with surrounding 4 windows and a door at present. Then in the front yard starting with six meter high Xmas trees, these will also be rgb pixels.
The gutters and gable will be in three sections all facing the street. The east gutter is about 3m, the gable about 4m and the west gutter about 4.5m.
The window on the eastern end is about 8m all round, next window would be around 6, the door would be around 6m with a window each side of about 3m each.
The trees are to be spirals using a full 5m length of rgb pixels. There will be six of them and about 6 to 8m from the house.
I would like to put a singing Santa on the front wall but like to get the basics done first. The house is a Queenslander and six foot off the ground. I am looking at using the Falcon16 controller with the extra board on top for expansion and having it under the house. Running all cable from there to each rgb pixel strip. The greatest distance to a rgb pixel strip will be approx 8m. Looking at using rgb pixel strips with 30pixels per meter.
Additional items will be placed about but that hasn't been finalised yet.
Any hints and tips will be great.
Cheers
Stickman