Video Tutorial on Setting Up LightShow Pro with E1.31 Controllers

fasteddy

I have C.L.A.P
Global moderator
Joined
Apr 26, 2010
Messages
6,645
Location
Albion Park NSW
Here is a 15 minute tutorial on how to setup LSP using E1.31 hardware, I hope this helps people and saves them some time.

https://vimeo.com/45183963

*NOTE: The capture software i used had a limit of 15 minutes so thats why the video cut off. I was mainly explaining for people to turn on the LSP output if using the grid for testing or to either just use the hardware testing utility, so only really 30 seconds worth that was cut off.
 

anon

Apprentice elf
Joined
Dec 30, 2011
Messages
91
Location
Adelaide
Nice one.


That certainly made things clearer. The though of logical 'elements' instead of physical 'controllers' makes getting your head around how it all bolts together so much easier.
 

fasteddy

I have C.L.A.P
Global moderator
Joined
Apr 26, 2010
Messages
6,645
Location
Albion Park NSW
Donny M. Carter said:
Thanks Eddy! Would you make a video on the 2 ways to test hardware that you mention at the end of the video?
The capture software i used had a limit of 15 minutes so thats why the video cut off. I was mainly explaining for people to turn on the LSP output if using the grid for testing or to either just use the hardware testing utility, so only really 30 seconds worth that was cut off.
 

angus40

Senior elf
Joined
Dec 23, 2011
Messages
535
Thanks For this info video Eddy .

This will assist the novice greatly .

Cheers
Richard
 
Top