Have setup two 750 pixel Matrices using WS2815 Strip Lights.
50 per row * 15 rows.
On one of the Matrix, I have this really odd issue where pixel 346 is not being accounted for.
When I run a sequence, Pixel 345 moves straight to 347. I've checked:
50 per row * 15 rows.
On one of the Matrix, I have this really odd issue where pixel 346 is not being accounted for.
When I run a sequence, Pixel 345 moves straight to 347. I've checked:
- Traces and solder on pixel and cuts - no issues identified.
- Pixel 346 (channels 3130-3132) are shown in both Xlights and in the Controller.
- There are no channel conflicts, and I have more Universes allocated than filled by the props.
- When I Test the pixels in Xlights Pixel 345 lights correctly (and each channel tests correctly).
- When I test Pixel 347, the next Pixel after 345 lights up correctly.
- When I test Pixel 346, nothing happens.
- When I test each channel of PIxel 346 while Pixel 345 is also lit up, Pixel 345 starts flashing.