Hardware Summary

APC718


The APC718 accepts a single universe of DMX via its RJ45 connection. It's SPI output can drive up to 25 WS2801 or LPD6803 intelligent pixels (string / strip).

  • Input: DMX (ESTA standard RJ45 socket)
  • Power: 9 - 36V DC
  • Output: 1 x SPI (4 way socket)

DC24


The DC24 accepts a single universe of conventional DMX via it's RJ45 connection. Each DC output corresponds to a single DMX channel. The DMX start address can be set via a push button and the incoming DMX stream.

  • Input: DMX (ESTA standard RJ45 socket)
  • Power: 5 - 36V DC (Can use 2 split voltages)
  • Outputs: 24 x DC (terminal blocks)

DC48


The DC48 accepts a single universe of conventional DMX via it's RJ45 connection. Each DC output corresponds to a single DMX channel. The DMX start address can be set via a push button and the incoming DMX stream.

  • Input: DMX (ESTA standard RJ45 socket)
  • Power: 5 - 36V DC (Can use 2 split voltages)
  • Outputs: 48 x DC (terminal blocks)

ECG-D4


The ECG-D4 accepts up to 4 universes of E1.31 data (DMX over IP) via it's Ethernet connection. Each of it's 4 DMX outputs can be configured to output a specific DMX universe. More than one output can also use the same incoming E1.31 DMX universe if required.

  • Input: Ethernet (RJ45 socket)
  • Power: Plugpack (5V)
  • Outputs: 4 x DMX (RJ45 sockets)

ECG-DR4


The ECG-DR4 accepts up to 4 universes of E1.31 data (DMX over IP) via it's Ethernet connection. Each of it's 4 DMX outputs can be configured to output a specific DMX universe. More than one output can also use the same incoming E1.31 DMX universe if required. Each DMX output can be internally jumpered for standard (ESTA) or Renard pinout on the RJ45 connector.

  • Input: Ethernet (RJ45 socket)
  • Power: Plugpack (5V)
  • Outputs: 4 x DMX (RJ45 sockets)

ECG-P12R


The ECG-P12R accepts up to 12 universes of E1.31 data (DMX over IP) via it's Ethernet connection. Each of it's 12 SPI outputs can drive a specified (via a configuration web page) type of intelligent pixel string / strip.

  • Input: Ethernet (RJ45 socket)
  • Power: 5 - 36V DC (Can use 2 split voltages)
  • Outputs: 12 x SPI (4 way sockets)

ECG-PIXAD8


The ECG-PIXAD8 accepts up to 8 universes of E1.31 data (DMX over IP) via it's Ethernet connection. Each of it's 8 SPI outputs can drive a specified (via a configuration web page) type of intelligent pixel string / strip.

  • Input: Ethernet (RJ45 socket)
  • Power: 5 - 36V DC (Can use 2 split voltages)
  • Outputs: 8 x SPI (4 way sockets)

USB485RJ-ISO


The USB485RJ-ISO is an electrically (optically) isolated version of the popular "OpenDMX" USB - DMX dongle. It provides one universe of DMX when used in conjunction with suitable PC software.

  • Input: USB ("B" socket)
  • Power: 5V (from USB connection)
  • Output: 1 x DMX (ESTA standard RJ45 socket)

This page has been seen 18 times.