cslampman
New elf
- Joined
- Dec 18, 2021
- Messages
- 17
As discussed in another thread, I had mentioned I was new and tossed around which controller to get. I recently got a Falcon 16v3, and have begun playing with the lights that I have, getting a feel for xlights, the Falcon web interface. The small 192 WS2811 pixel trees that I have, also have a 5V single channel white LED's (maybe 20 LED's) on a star at the top. I thought about replacing them with colored pixels, but finding the same ones that fit in the holes may be an issue. So, I may just use them to flash on/off at different points in the sequence. My question is, what hardware is available that would work this way. I don't know the exact type of LED they are and I'm not well versed on the different types that can be configured on a regular port. Thanks for any suggestions or recommendations.