-
-
go to bunnings and get some extension cords. -
B4IGO replied to the thread After Some 18AWG 3 Core.Given the length you;re after I'm guessing this is perhaps to run from your controller out to the models? Depending on what you want to...
-
You can log into the FPP using SSH, and remove the file from /home/FPP/media/sequences directory. and holy dinosaur FPP Batman 🤣
-
B4IGO replied to the thread How to Delete sequence in FPP.are you connecting to the correct FPP instance? Ie do you have fpp based controllers? Do you only have a master (ie your main show...
-
Are you using FPP connect to upload to the controllers? I would recommend that to make things easier.
-
B4IGO replied to the thread Remote access to show network.To answer your first question, most routers should let you configure the DHCP range that it will hand out addresses from. Make this a...
-
-
WA, 2024. Visionary Light Shows
-
Qld, 2024. XLATW submission 2024
-
Qld, 2024. XLATW 2024
-
NSW, 2024. Morton Lights entry for XLATW 2024
-
-
B4IGO reacted to JacksonHo's post in the thread Power Injection - Back Feeding Issue - Singular PSU with
Like.
Have you got a multimeter? Confirm you are getting 12v (in the correct polarity) direct off the power supply and then at each end of the... -
B4IGO reacted to merryoncherry's post in the thread Power Injection - Back Feeding Issue - Singular PSU with Like.
If I had to guess, there is a polarity accident of some sort... reversed, or both ground or both positive, as people do this all the...
-
B4IGO reacted to DougieB's post in the thread Baldrick ready to run plus lots of other stock with Like.
I want to give a big shout out to Alan for all the last minute support he has provided me. I left it to last minute to get back into...
-
-
Loading…
-
Loading…