Recent content by oxytousc

Hey folks, So I've got a large matrix in the display. It's 13 strings of 600 pixel lights that run 5 pixels high x120 wide. We've built shadow models for it, but they seem to have an offset issue. On the computer, you'll see the effect I intended to be on lights and then what actually appeared...

Yea, I have Off Refresh on, but it's not doing it. It needs data sent to it.

Would this relay work? I assume it would. Connect the PSU to V+ and V- and then run V+ from each pigtail to the relay instead of the board. https://a.co/d/fxKfJby

Thanks! Monumentally helpful.

Hey folks, I can't for the life of me remember how to make my moving heads move. Two are Mattos 380w and two are dominar beams. I know the sequences are progammed for Dominar beams, but they aren't moving either. I also have a custom map for the Mattos, but nothing is happening when I try to...

Thanks. If I’m running a relay, I gather I’d just connect the relay to the power supply and then splice it into the pigtails?

I've got some cafe lights that I'm putting in my show this year. They're working fine with sequences, but when I turn off a sequence it blinks red, blue, green and white--like a test pattern. Has anyone else experienced this and what was the solution? I'm running Wasatch Quad+ Antennas. I've...

That’s a good call

Good idea

Yea. That might be the money maker!

They just come undone at the nut. I hand tighten. I've wrenched it. I'm know to grab them by the cords too, but they come undone even before that, just in jostling cords to connect them. It might be a brand issue, but it's super annoying. Like 30% of mine have come off.

Yea. I’ve tried the hot glue. More than a dab in fact. They still come out. I’m hard on them but like they all pull out. I’m thinking of trying MEK

Does anyone else have issues with glands coming undone constantly my PG seven’s for pigtails are always coming undone from the boxes. And if you found a fix, what is it?

Those are pretty slick. That may have to be something I do next year.

Yea. I’d agree with that. I’ve had WAY more failures this year. I purchased most of my stuff from Ray Wu directly and he’s been good about replacements. But I’ve had to ask for way more replacements than ever before. Same with controllers. The Kulp’s are rock solid, but I’m having issues with...