Bunnings Colored Coro 5mm
- Thread starter stooged
- Start date
Orange for Halloween & red/green for Christmas. It's like they know we exist 
I made some last year. What's your process when making props? Tracing stencils, cutting on a laser cutter or cnc?
darylc
404 darylc not found
- Joined
- Dec 8, 2012
- Messages
- 1,203
Go for a drive - https://bunnings.youinstock.com.au/search/0488076/nsw
BBQNinja
New elf
- Joined
- Nov 28, 2019
- Messages
- 33
I was just building some props to test the white stuff out
Used the 3mm for the presents so the 9W floods could shine through. Only blue masking tape for the ribbon in the photos. Used the 5mm for some spinners, which I ran out of time to add the xlights model for, so not tested yet. Pretty sturdy so far.
Used the 3mm for the presents so the 9W floods could shine through. Only blue masking tape for the ribbon in the photos. Used the 5mm for some spinners, which I ran out of time to add the xlights model for, so not tested yet. Pretty sturdy so far.
Attachments
Last edited:
- Thread starter
- #7
I use a large format 180w co2 laser.
I do have a cnc but the coro at bunnings does not produce the cleanest cut so i just use the laser.
I started with a 20w optical power diode laser and that worked fairly well but certain colors it failed on, white and black were ok.
this shows the speed of cutting, its not super fast and the laser is only running at 30% of its power using a 2.5in focal lense.
View: https://www.youtube.com/watch?v=9C0KKDGVPEQ
Last edited:
Thats very nice. Yeah I have access to a laser at work, only 100w but even that turned down does a great job. Are you drawing your own designs or can find the files online somewhere? cheers
- Thread starter
- #9
I have a mix of things all created in lightburn.
Some of them are completely custom while others are recreations of other props by using pictures and rebuilding them in lightburn.
There are a couple of files in the cnc directory of the xlights share folder you can play with.
The bulbs have the mouth layout you can take and put on other designs.
Xlights Share – Google Drive
share.xlights.org
I made this a while ago to show how to use lightburn to make props.
It is basic and not all tools were used like "copy along path" could have been used to simplify some things.
View: https://m.youtube.com/watch?v=CKCdUJi3QoA
In this one i show how to use the trace image tool, this can be useful for taking pictures of props and things from websites and recreating them for educational purposes of course.
View: https://m.youtube.com/watch?v=_XVG7M-liUE
I did some test cuts in the bunnings 8mm stuff yesterday
Cuts came out pretty clean
photos.app.goo.gl
Cuts came out pretty clean
New item by David Dunmore
photos.app.goo.gl
BBQNinja
New elf
- Joined
- Nov 28, 2019
- Messages
- 33
Haha, Made these with a holepunch and hammer. Didn't realize we were talking CNC (should have paid attention to category). So jealousI was just building some props to test the white stuff out
Used the 3mm for the presents so the 9W floods could shine through. Only blue masking tape for the ribbon in the photos. Used the 5mm for some spinners, which I ran out of time to add the xlights model for, so not tested yet. Pretty sturdy so far.
Christmas is coming 
what size laser - watts
what speed - mm/minute
how many pass - if more than
wondered about putting a laser on the CNC although id always been looking at a c02 tube laser and was nerves about it breaking on shipping