2.8 Scheduler

cscool36

Full time elf
Joined
Jan 9, 2011
Messages
167
Location
Belrose NSW
Hi All,
Just having problems with loading my programs to start.
I have configured in LSP and all is working when played.
I am getting an error message that Protocol and zones are not configured. Attached a screen shot.
Thanks
Colin
 

AAH

I love blinky lights :)
Community project designer
Joined
Dec 27, 2010
Messages
4,188
Location
Eaglehawk
I might be wrong as I've never used the LSP scheduler but I read that error as being a possible conflict on zone 1 being configured as both DMX pro and also E1.31. DMX pro is pretty uncommon and Open DMX is usually used. Not a real lot of users use both a USB dongle and E1.31.
 

cscool36

Full time elf
Joined
Jan 9, 2011
Messages
167
Location
Belrose NSW
Hi AAH
Thanks for the tip. I have changed the zones but still having the some problems.
It works in 2.5 scheduler but not in 2.8.
Colin
 

cscool36

Full time elf
Joined
Jan 9, 2011
Messages
167
Location
Belrose NSW
I think I've found the problem.
You also need to configure the outputs in the scheduler as well.
I have the DMX on zone 1 and the E1.31 on zone 2.
Now doing some testing.
Thanks
Colin
Colin
 
Top