a new idea for ffb power injection board

Similar idea to my APC731 and Alan's Hexfuse boards except it has no LEDs.

The one in the video does have -ve terminal distribution, but I prefer to run the -ve wires directly to the power supply.
 
dave your one is apc-718 6 way fused power breakout pcb were is the manual for it?
 
Mine can be found here on the AVD web site. Some more details here on the da-share wiki.

Alan's is pretty much the same as mine I think - 3 power feeds in and 6 fused power feeds out.

Both also have LEDs to show when the fuse has blown (and a load is still connected).
 
Davids board is at https://www.audiovisualdevices.com.au/viewprod.php?catid=&productid=APC731
Mine in at http://www.hansonelectronics.com.au/product/hexfuse/
Both of them are 3 input and 6 output. If the fuse is blown or not inserted then the led will light up.
The current rating, fuse type and physical size are about the only differences between the 2 of them. The advantage of 3 in and 6 out is that it allows multiple power supplies on the 1 board or handle greater current. The 1 in the video has 1 30A input connector which means that the 6 outputs can only total 30A. My hexfuse for instance has 3 30A inputs and 6 15A fused outputs.
 
You must log in or register to reply here.
Back
Top