Adding DMX36MK2 to my existing 2 LOR Controllers

William Stevens

New elf
Joined
Apr 12, 2019
Messages
8
I currently have 2 LOR controllers. I run Showtime advanced and recently purchased a DMX36MK2 controller to add to my system. The DMX36MK2 runs and tests ok. Connecting the last LOR controller with a Cat 5 cable, a LOR to DMX adapter, followed by another cat 5 into the DMX36MK2.
When I run the Hardware utility it only locates the first LOR controller. When I remove the DMX36MK2 cables it locates both LOR controllers.
I am obviously doing something basically wrong. The Hardware utility doesn't find the DMX Unit. Can someone point me in the right direction please.
 

AAH

I love blinky lights :)
Community project designer
Joined
Dec 27, 2010
Messages
4,188
Location
Eaglehawk
Problem sorted via a quick Teamviewer session. A couple of minor issues with the Network setup. LOR network was still enabled and DMX was set as USB pro rather than raw dmx.
 

William Stevens

New elf
Joined
Apr 12, 2019
Messages
8
Thank you immensely Alan, it had me going in circles for a few days. Now I can start with the "Easy" work like making new displays.
When I'm down in Melbourne next, I'll call in to say hello...
 
  • Like
Reactions: AAH
Top