Baldrick 8 & FPP Proxy setup issue

[PixelProject]

Good Afternoon All,

As a new comer setting up for their first Christmas show this weekend I have come across an issue in the last week of playing around and testing, up until Frida past I every time I tuned the control set up on the IP addresses had been stable and always the same on the baldrick and FPP, now every time I turn it on its different, So I set up the static addresses following the details in Greg Macarees videos on YouTube but now I have no connectivity for the baldrick to the internet and FPP seems to take too long to start up so the Baldrick controller isn't connecting. Running a Pi4 2Gb on FPP 9.4. Any assistance would be greatly appreciated. I think my hair has started falling out at an increased rate this week.

 

[MikeKrebs]

What is the IP of your PC, the router, the FPP and Baldrick?

 

[PixelProject]

FPP is connected to the network wirelessly
Router 192.168.4.1
FPP 192.168.4.177
Baldrick 192.168.4.173

 

[MikeKrebs]

FPP has two addresses? ETH0 and wlan0? Having them both at 4.x addresses might be a bit of problem. Typically when using FPP wirelessly, you would setup a show network on a different subnet.
Is FPP connected directly to baldrick or there is a switch involved? Is the switch "on the home network" or is it dedicated for lights?

 

[PixelProject]

FPP has two addresses? ETH0 and wlan0? Having them both at 4.x addresses might be a bit of problem. Typically when using FPP wirelessly, you would setup a show network on a different subnet.
Is FPP connected directly to baldrick or there is a switch involved? Is the switch "on the home network" or is it dedicated for lights?

There was / could be a switch involved, I thought initially because the switch is dedicated to the lights an not connected to the home network it might have been the thing causing the problem. I'll double check the settings and provide screen shots tonight once I get home

 

[PixelProject]

FPP has two addresses? ETH0 and wlan0? Having them both at 4.x addresses might be a bit of problem. Typically when using FPP wirelessly, you would setup a show network on a different subnet.
Is FPP connected directly to baldrick or there is a switch involved? Is the switch "on the home network" or is it dedicated for lights?

 

[PixelProject]

Continued

 

[domhodgson]

Hey PixelProject,

If you get the Baldrick Buddy app (http://baldrickboard.com/buddy) it will scan your Baldrick and FPP settings and workout where the mismatch is for you and let you know

 

[PixelProject]

Hey PixelProject,

If you get the Baldrick Buddy app (http://baldrickboard.com/buddy) it will scan your Baldrick and FPP settings and workout where the mismatch is for you and let you know

Thank you, I followed the advice and updated FPP to the latest version and I'm still not getting the baldrick to connect to the internet

 

[domhodgson]

if you could put a support ticket in via Baldrick Buddy in settings then help, it will send me all your settings and I can work out what's going on