Change intensity of sequence

yzguy96

Full time elf
Joined
Sep 24, 2012
Messages
174
Location
Chicago
Hi,Is there an easy way to change the intensity of the whole sequence all at once in LOR? Seems like when i run on high intensity 100% it introduces either power issues or something cause it flickers and sometimes colors are off especially on white...if i can decrease the intensity i think it would eliminate most of the noise.
 

hdracer

There is no rehab for the CLAP
Joined
Feb 17, 2012
Messages
176
Location
Sugar Land,Tx
You can scan overall of the sequence asif to copy. Hit "I" on keyboard and ll highlighted will go to 50% intensity. This would be easiest way of turning all channels intensity down.
Hope this helps
 

Kaden

Pixels! I need more pixels!
Joined
Jan 10, 2012
Messages
724
Location
Gold Coast
hdracer said:
You can scan overall of the sequence asif to copy. Hit "I" on keyboard and ll highlighted will go to 50% intensity. This would be easiest way of turning all channels intensity down.
Hope this helps


Unfortunately that does not work, it just sets all the RGB channels to 50% (ie half white) in that cell rather than 50% of the colour in the individual cell.
 
Top