DMX and LOR

[brettjm]

is it possible to daisy chain a DMX controller to a LOR controller or do you need to get a seperate dongle or E1.31?

 

[Kaden]

Most LOR controllers support DMX, check the wiki, it will have the information, I would link it but I am posting on my phone at the moment

 

[AAH]

You can use the same dongle providing the firmware in the LOR boards runs dmx. You will need a crossover cable or adaptor as the pins used on LOR dongles and boards is different to what is mostly used on dmx boards which is ESTA pinout. The channels in your sequencer would all have to be configured as DMX as well and not half LOR and half DMX.

Info on wiring is at http://auschristmaslighting.com/wiki/DMX_Adapter_Leads

 

[fasteddy]

You can also download this presentation with diagrams on running LOR controllers with DMX controllers

http://auschristmaslighting.com/forums/index.php/topic,1139.msg9601.html#msg9601