Bokines
New elf
I am at the final stage of putting my show together in LOR and have run into an issue. I have 11 LOR boxes running my 240v elements and 24 CCR's for my screen and Roof top tree. This year I have added 5 of Rays 27 Channel DMX boards to run some dumb pixels. 4 controllers run 4 fans each with 8 outputs, a total of 24 channels per fan. I then have the 5th DMX card running 9 mini trees of dumb pixels. A total of 6 LOR 485 dongles are used in for the output. One of those dongles is used to output to the DMX 27 channel boards.
I have made the fans occupy the first DMX channels 1 to 96. The trees then occupy the next 27 channels 97 to 123. All 5 DMX boards are run under universe 1 as the total channel count does not exceed 512.
When I run my show every thing except the trees run. When I look at the boards, the first 4 running the fans have the red light flashing however the board running the trees has the red light steady.
Can anyo e suggest what the issue may be.
I have made the fans occupy the first DMX channels 1 to 96. The trees then occupy the next 27 channels 97 to 123. All 5 DMX boards are run under universe 1 as the total channel count does not exceed 512.
When I run my show every thing except the trees run. When I look at the boards, the first 4 running the fans have the red light flashing however the board running the trees has the red light steady.
Can anyo e suggest what the issue may be.