remoteutah
Full time elf
My initial plan called for 5 dumb 5m rgb led strips to be used as colorwashes. I planned on using the J1sys ECG-D2 to convert E1.31 to DMX to which I would use 5 of those cheap $10 dip version 3 channel dmx controller. Cost without lights = approx $130
But after testing the strip as a colorwash, I found I will need to use 10 strips instead of 5. I want to keep it as 10 seperate strips so that doubles the # of cheap 3 channel dmx controllers. Now = $180
So, my question is... is there a cheaper route to go? Is there a E1.31 dumb rgb controller? Is it cheaper than $180? That would at least save me adding on a E1.31 to DMX protocol converter, right?
But after testing the strip as a colorwash, I found I will need to use 10 strips instead of 5. I want to keep it as 10 seperate strips so that doubles the # of cheap 3 channel dmx controllers. Now = $180
So, my question is... is there a cheaper route to go? Is there a E1.31 dumb rgb controller? Is it cheaper than $180? That would at least save me adding on a E1.31 to DMX protocol converter, right?