Enttec DMX Open Question

jediknight2

Full time elf
Joined
Aug 30, 2012
Messages
196
Location
North Carolina
I am going to go ahead and use a USB Entec DMX Open this year JUST for my floods. These are the Ray Wu 10W floods. The way I plan on wiring it up is as follows:

Data + = Red
Data - = Black

There is no in/out wiring from each flood so I assume I can just connect the Data+ from the Enttec to the Data+ of the first flood and the Data + of the second flood...Just want to make sure I don't need to do anything different.

I would have ordered something different...but they ship from Raleigh and I live in Wilmington...so I will get it tomorrow...
 

Attachments

  • enttec.JPG
    enttec.JPG
    10.9 KB · Views: 17

fasteddy

I have C.L.A.P
Global moderator
Joined
Apr 26, 2010
Messages
6,648
Location
Albion Park NSW
Yes this is the way you connect, make sure the joins for the DMX are as close to the controllers/floods as possible to help reduce any signal reflection that can be generated by splitting a DMX signal.
 
Top