Ethernet to DMX converter options

jcdammeyer

jcdammeyer

New elf
Joined
Oct 12, 2011
Messages
15
I have a J1SYS EthConGateway ECG-DR4.

I want a few more Ethernet to DMX Universe converters so I started searching.

So far I've found
http://www.ebay.ca/itm/DMX-512-controller-Art-Net-E1-31-ACN-six-output-input-ports-ArtNet-Ethernet-/321556994192 for $114.50 US
and
http://www.diyledexpress.com/index.php?main_page=product_info&cPath=22&products_id=157 for $70.04.

They both look pretty nice and the difference in price will easily be reflected in cost of packaging.

Anyone have experience with these. Any look out for this problem issues?

Thanks
John
 
John,
I have 4 of the DIYLEDExpress bridges. Absolutely NO problems. Love the simplicity, yet power in it.
Can't say anything about the other since I don't have any experience. The specs look good, and the examples are quite interesting.
 
+1 on the DIYLEDEXPRESS bridge, I have 2 and love them.
You should really look into the new Falcon board though, it has 4 dedicated DMX outputs as well as supporting 680 pixels per output (16 outputs).
Looks like an awesome board.
 
hi John,

Where are you located, this can make a big difference in items recommended.

The other option is of course if your getting into Pixels at all then consider the pixel controllers that also output DMX streams.

Cheers
 
Depending on where you're at, I have a couple dr4's that I could part with if you just wanted to stay consistent.
 
I use both ECG-D4 and a DIYLEDExpress bridge. Both work as expected.


The DIYLEDExpress bridge comes as a kit you can build or as a prebuilt, although I can not seem to find the Pre-built link anymore. Mine also came with a waterproof box for outdoor mounting.


-Blu
 
DR-4 here but I would consider useing a pixel controller as most of them have 2 DMX bridges on them too
 
You must log in or register to reply here.
Back
Top