F48V4-NS freezes after stay idle for about 1hr

ArunD

New elf
Joined
Mar 31, 2023
Messages
5
Hi All,
Can someone help me on the below issue.
I'm using F48V4-NS (build 23). After it stays idle for about 1hr it freezes and stop responding. I cannot access the controller via the IP address.
On-board re-booting and Power off/on also do not respond. The only way to get the controller back on-line is to do a factory reset.
Has anyone experienced this?
Any solution would be greatly appreciated.

Cheers
 

LawrenceDriveLights

Senior elf
Joined
Jan 16, 2018
Messages
581
How are you powering the F48?
From memory they require 3 amps.
Are you also running pixels directly from the controller? If so maybe try running the board without any pixels to try and eliminate any possible issues from voltage drop.
Does the onboard power indicator LED stay on?
 
Last edited:

ArunD

New elf
Joined
Mar 31, 2023
Messages
5
How are you powering the F48?
From memory they require 3 amps.
Are you also running pixels directly from the controller? If so maybe try running the board without any pixels to try and eliminate any possible issues from voltage drop.
Does the onboard power indicator LED stay on?
I have a separate power supply for the controller. Pixels are on a different power supply. I connected ground terminals to make it common. the onboard power indicator LED stays on... I tried using the static IP via a switch. It appears static IP is more stable. However still experienced freezing one time during testing...
 
Top