Greedy Guidos 2012 Christmas Lights

Greedy Guido

Sorry, My fault. I forgot you were an idiot.
Joined
Jun 18, 2012
Messages
10
Location
Brisbane
Finished all the enclosures so before I start hooking them up to LSP I though I would post some photos of the finished products.

First is my AVD APC718 Enclosures

AVD%20APC718%20Enclosure.jpg


AVD DC 48 Enclosure

AVD%20DC48%20Enclosure.jpg


LOR DC Enclosure (2 LOR Units per Enclosure)
Dual%20LOR%20DC%20Enclosure.jpg


J1SYS P12R Enclosure
J1Sys%20P12R%20Enclosure.jpg
 

AAH

I love blinky lights :)
Community project designer
Joined
Dec 27, 2010
Messages
4,188
Location
Eaglehawk
They're looking good Jason. I'm presuming in the second photo that you're either needing more than the 250W or 350W that the power supply will supply or that you have 2 different voltages being controlled by the DC48.

On a purely personal preference note I always either put a knot in the mains cables or add cable ties just on the off chance that the gland slips. The last thing that you want it bities floating around loose either in or outside your enclosures.
 

Bird

LOR user
Joined
Nov 8, 2011
Messages
1,746
Location
Cincinnati, Ohio, USA
Agree with Alec, very clean professional looking work.

Also agree with Alan, a cable/wire tie on the AC cable inside the box as an added safety feature.
 

Greedy Guido

Sorry, My fault. I forgot you were an idiot.
Joined
Jun 18, 2012
Messages
10
Location
Brisbane
Had the camera out so I though I will take a few Kodak moments

RGB Dual SIde Radio Sign



Dual 24V power Injection Box



24V to 5V Dual Output Dc to DC Converter Power Injection Module



36V Test Box

 
Top