Hardware setup of ECG-P2 video

mrlightmadness

New elf
Joined
Dec 18, 2012
Messages
10
Location
Piedmont SC
keep the videos coming! appreciate you putting these together in your spare time to help everyone out!!! I must of missed the link you were going to post with another video someone else did.
 

harrison0550

Full time elf
Joined
Dec 16, 2011
Messages
190
Location
Chattanooga TN
Thanks! ;)

All links are in the video's descriptions but I will post them here as well. I highly suggest you watch all of them. The only reason I even videoed going into the controllers string settings is to show the WS2811 in the drop down menu and all 8 universes. All the previous videos Ive seen were all on an older firmware and didnt show any of that.

Videos by ED at j1sys on the UBL setup. (click the link and it will load) and Video by Phil on the UBL setup.
http://www.j1sys.com/legacy/UBL_Quick.swf

ublecg2 on Vimeo

Download link for the UBL:
http://auschristmaslighting.com/forums/index.php?action=dlattach;topic=2507.0;attach=2472



Video by Phil setting up the ECG-P2 in LOR's network config.

LOR S3.5 - E1.31 - J1SYS on Vimeo

And here is a link to download the P2 quick notes with jumper settings.
http://auschristmaslighting.com/forums/index.php/topic,2793.0.html

Those videos are also located here for refrence:
http://auschristmaslighting.com/forums/index.php/topic,2507.0.html

Hope that helps.
 

Trafficman

Teach Me!!!
Joined
May 4, 2012
Messages
136
Location
Pensacola, Florida
Andy,

I would not even try to tell you I am a rookie at all this. The videos that you have created are the heat and will help me get some sleep. I have been dreaming pixels after seeing so many videos of displays but was unsure were to start or even what questions to ask. Thanks again for your hard work on the videos.....

Jeff Messer

PS. Special thanks to Eddy on the guide. It has helped me out greatly..
 

harrison0550

Full time elf
Joined
Dec 16, 2011
Messages
190
Location
Chattanooga TN
Figured I would add these pics as well. For anyone confused on what to do with that extra ground wire on 2811 pixel strips.............

ecg%20p2%20%20hookup.jpg



And another great pic by FastEddy.........

p2%20wiring.JPG
 

gerry

Senior elf
Joined
Dec 19, 2012
Messages
855
Location
Surrey Hills,Melbourne
Hi Andy,

Do you still have the pcitures referred to above and if so , would you be able to attach them again ?
I am assuming that I cant see them as they are no longer present on the server ?

Regards
 
Top