HI, Have two questions please:
1. have ordered INK1003 for matrix, 20 strips x 75 pixels= 20 x 2.5 metre strips.
Have read that INk1003 only runs at 12v for metre lengths only ie 1m or 2m or 3m etc.
That other measurements are 5v if cut ie my 2.5metre should be run at 5v.
Have asked 'Ray' for clarification and he has said can still run 2.5metre lengths at 12v.
Can anyone else confirm 'Ray's' comment please.
2. if I am stuck with this order and can only run at 5V, what would be best controller option, J1sys p12R, SanDevice E682 or other choice please
Thanks for all your help in advance
Boof63 :-\ :-\ :-\ :-\
PS Alternate Strip choices for the above matrix would be helpful as well please, prefer 12v if possible. Thanks
PPS thanks to AussieDoug for 1st reply, this prompted the edit ,cheers
1. have ordered INK1003 for matrix, 20 strips x 75 pixels= 20 x 2.5 metre strips.
Have read that INk1003 only runs at 12v for metre lengths only ie 1m or 2m or 3m etc.
That other measurements are 5v if cut ie my 2.5metre should be run at 5v.
Have asked 'Ray' for clarification and he has said can still run 2.5metre lengths at 12v.
Can anyone else confirm 'Ray's' comment please.
2. if I am stuck with this order and can only run at 5V, what would be best controller option, J1sys p12R, SanDevice E682 or other choice please
Thanks for all your help in advance
Boof63 :-\ :-\ :-\ :-\
PS Alternate Strip choices for the above matrix would be helpful as well please, prefer 12v if possible. Thanks
PPS thanks to AussieDoug for 1st reply, this prompted the edit ,cheers