1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

Laserlite Matrix Defuser

Discussion in 'Corrugated Plastic (Coro) & 3D Printing' started by BradsXmasLights, May 25, 2013.

  1. BradsXmasLights

    BradsXmasLights WiFi Interactive

    Joined:
    Dec 23, 2010
    Messages:
    506
    Likes Received:
    10
    Location:
    Brisbane, Australia
    Find Me On:
    OK this isn't Coro - but it's close enough :)
    I was in Masters the other night and noticed this in roofing section...
    [attachimg=2]
    And especially how they had the demo panels backlit... :D
    [attachimg=3]

    Which then has me thinking, I wonder how well this stuff would work when laid sideways as a matrix screen defuser with LED strip under the ridges? Then each pixel should appear larger. Also when laid flat on a 22degree roof pitch, the wider profiles/spacing may also assist with the viewing angle should people be standing on the footpath, etc.

    What do you guys think?
    [attachimg=1]

    Laserlite 2000 pricing is $15/M, or LaserLite 3000 is $18/M, in stocked lengths of 1.8, 2.4, 3 & 3.6 lengths. Full Specs: http://www.bayermaterialscience.com.au/sheetingproducts/wp-content/uploads/2013/05/Lasrlte2000+512.pdf
     

    Attached Files:

Share This Page