Mounting Plates for E-Top P5 outdoor panels

Qantarus

Qantarus

Yeah yeah I admit it - i'm addicted :D
Joined
Dec 10, 2017
Messages
38
Location
Largs
Hey all

I recently purchased some of the above panels and I am now looking for mounting strips / panels for them.

Does anyone have any recommended places to buy these from or let me know how much it might cost to get some 3D printed?

I'm only looking at 2 matrixes - the 1st is 3 x 4 and the 2nd is just 4 wide.

These are the panels in question:

www.aliexpress.com

P5 Outdoor full color LED module SMD2727(3in1) screen unit board with Power cable and Data cable,64*32pixels,160mm*320mm - AliExpress 39

Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com www.aliexpress.com

I will add measurements later today

Any ideas / help would be most appreciated :)
 
Last edited:
you might need to be more specific, indoor panels, outdoor panels, 32x32 or 64x32. Perhaps post photos and ideally with measurements as there are so many types of panels with different mounts these days.
 
The panels are 64 x 32 (320mm x 160mm) outdoor panels.

See the attached image for measurements
P5 Panel Measurements.jpg
 
Did you guys end up getting any STL files created for these? I have the same panel and the brackets I got from wiredwatts don't really line up for me, so want to print my own and haven't bee able to find anything that works yet.
 
drlucas said:
After some more searching, I have found these ones - https://www.thingiverse.com/thing:2524334 - that seem to work!
Click to expand...
I hadn't had any luck - was going to rig something up with a bit of ply as a backing board and using the silicone seals as a template.

Might have to have a look at these now - just need to find someone to print them for me :)
 
I realize this is an old post but has anyone found any mounts/brackets that work with these outdoor p5 panels yet?

Thanks!
 
You must log in or register to reply here.
Back
Top