My EtherConGateway Mounting Tray

dmoore

Senior elf
Joined
Apr 26, 2010
Messages
586
Location
Houston, TX, USA
I was maching some 1" (26mm) HDPE for some of my MegaBalls and I added in a "tray" just to keep the bottom and sides safe.
 

Attachments

  • IMG_0271 (Medium).png
    IMG_0271 (Medium).png
    1.2 MB · Views: 74
  • IMG_0272 (Medium).JPG
    IMG_0272 (Medium).JPG
    85.2 KB · Views: 40

fasteddy

I have C.L.A.P
Global moderator
Joined
Apr 26, 2010
Messages
6,648
Location
Albion Park NSW
Yes very nice and it looks so snuggly in there, a clear cover and at night the ECG will be its own little light display with all those onboard LEDs flashing.
 

j1sys

There are no rules, and those are the rules.
Community project designer
Joined
May 19, 2010
Messages
242
Location
Knoxville TN USA
David -

I know I just published them but please read the jumper setting section near the end of the 1 Sep 2010 assembly manual. You need to rotate the DMX/Renard jumpers 90 degrees. They should be side by side at right angles to the RJ45.

Ed

Pretty box!!
 

dmoore

Senior elf
Joined
Apr 26, 2010
Messages
586
Location
Houston, TX, USA
j1sys said:
David -

I know I just published them but please read the jumper setting section near the end of the 1 Sep 2010 assembly manual. You need to rotate the DMX/Renard jumpers 90 degrees. They should be side by side at right angles to the RJ45.

Ed

Pretty box!!

Thanks - I couldn't quite make out the text diagram in the instructions.
 
Top