1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

Pixlite 16 and X lights

Discussion in 'Advatek Lights' started by nzlongfellow, Sep 7, 2014.

  1. nzlongfellow

    nzlongfellow Dennis from NZ

    Joined:
    Jan 2, 2014
    Messages:
    538
    Likes Received:
    0
    Location:
    Lepperton, Taranaki
    Find Me On:
    I have 1 x mega tree.
    24 strands of 150 pixels (5m x 30/m) thus the total is 3600 pixels.
    Wired 150 up/ 150 down 12 times so 300 pixels per strand.
    Each set of 300 is on one Pixlite output thus 12 outputs used.
    Set Output 1 as Universe 1 and 300 pixels.
    Set Output 2 as Universe 3 and 300 pixels and so on up to output 12.


    Set X-lights Mega tree as 12 strands x 300 pixels and 2 strings per strand. Starting Bottom Right.


    Setup 24 universes in X-lights 1 - 24 with 150 pixels per Universe.


    I get gaps in my tree.


    Have tried setting X-lights Mega tree as 24 strands x 150 pixels and 1 string per strand and setting Pixlite to 300 with a Zig Zag at 150.

    Can not seem to get a combination of settings that gets tree working properly.
     

    Attached Files:

  2. Superman

    Superman I Have C.L.A.P and its very infectious Global Moderator

    Joined:
    May 29, 2010
    Messages:
    1,648
    Likes Received:
    20
    Location:
    Ipswich-QLD
    Find Me On:
    Topic moved nzlongfellow ;)
     

Share This Page