nzlongfellow
Dennis from NZ
I have 1 x mega tree.
24 strands of 150 pixels (5m x 30/m) thus the total is 3600 pixels.
Wired 150 up/ 150 down 12 times so 300 pixels per strand.
Each set of 300 is on one Pixlite output thus 12 outputs used.
Set Output 1 as Universe 1 and 300 pixels.
Set Output 2 as Universe 3 and 300 pixels and so on up to output 12.
Set X-lights Mega tree as 12 strands x 300 pixels and 2 strings per strand. Starting Bottom Right.
Setup 24 universes in X-lights 1 - 24 with 150 pixels per Universe.
I get gaps in my tree.
Have tried setting X-lights Mega tree as 24 strands x 150 pixels and 1 string per strand and setting Pixlite to 300 with a Zig Zag at 150.
Can not seem to get a combination of settings that gets tree working properly.
24 strands of 150 pixels (5m x 30/m) thus the total is 3600 pixels.
Wired 150 up/ 150 down 12 times so 300 pixels per strand.
Each set of 300 is on one Pixlite output thus 12 outputs used.
Set Output 1 as Universe 1 and 300 pixels.
Set Output 2 as Universe 3 and 300 pixels and so on up to output 12.
Set X-lights Mega tree as 12 strands x 300 pixels and 2 strings per strand. Starting Bottom Right.
Setup 24 universes in X-lights 1 - 24 with 150 pixels per Universe.
I get gaps in my tree.
Have tried setting X-lights Mega tree as 24 strands x 150 pixels and 1 string per strand and setting Pixlite to 300 with a Zig Zag at 150.
Can not seem to get a combination of settings that gets tree working properly.
