Power balancing T

[Firemansam]

Does anyone know where I could buy a pre-made power balancing T?
The Mattos one is not an option in NZ as they can't ship here apparently.

 

[AAH]

Not sure what a balancing tee is configured like but I suspect it's possible the same config as my power pass tees.

Shop | Hanson Electronics

Xconnect flat wire pigtail tee.

www.hansonelectronics.com.au

 

[thewanderingpine]

if you take Alan's Tee, connect a 3 pin x-connect male pigtail to the pos/gnd then you could build your own.

Spiker T Power Balance Cable - Hassle-Free Power Balancing for RGB LED

optimize Your Lighting Setup with the Spiker T Power Balance Cable Tired of uneven lighting in your RGB LED props? The Spiker T Power Balance Cable by Mattos Designs is the ultimate solution for ensuring consistent power distribution across your LED strings. Whether you're working with 5V or 12V...

mattosdesigns.com

 

[Katekate]

Not sure what a balancing tee is configured like but I suspect it's possible the same config as my power pass tees.

Shop | Hanson Electronics

Xconnect flat wire pigtail tee.

www.hansonelectronics.com.au

yeah its basically that with an xconnect to the end of the prop on the power only line.


I got some from Ray Wu that had all 3 pins connected and just ripped the data pin out of the injection plug.