janastas
Full time elf
- Joined
- Nov 30, 2020
- Messages
- 120
Hi All,
I'm currently running all my power injection straight from a power distro board to a particular point to power inject.
What I'm currently doing is at the end of the pixel string I'm adding a power tee that allows you to plug in a 2 core ray wu pigtail to provide power, the tee can be found via the following link (https://www.aliexpress.com/item/1005002060475726.html?spm=2114.12010615.8148356.9.71ba64e81htt9P)
What I'd like to do for the two core cable coming from the power distro board and at the first injection point cut in and add a second pigtail to continue the power injection run so I don't have to use another terminal from the power distro board.
I don't expect to power inject more than 2-3 times on each of my pixel controller ports but was wondering if any forum members can provide some examples but also how you'd water proof the additional 2 core pigtail coming off the main one
Example of what I'd like to do below.
I'm currently running all my power injection straight from a power distro board to a particular point to power inject.
What I'm currently doing is at the end of the pixel string I'm adding a power tee that allows you to plug in a 2 core ray wu pigtail to provide power, the tee can be found via the following link (https://www.aliexpress.com/item/1005002060475726.html?spm=2114.12010615.8148356.9.71ba64e81htt9P)
What I'd like to do for the two core cable coming from the power distro board and at the first injection point cut in and add a second pigtail to continue the power injection run so I don't have to use another terminal from the power distro board.
I don't expect to power inject more than 2-3 times on each of my pixel controller ports but was wondering if any forum members can provide some examples but also how you'd water proof the additional 2 core pigtail coming off the main one
Example of what I'd like to do below.