ShellNZ
Senior elf
I have 80m of 2811 strip that I will be putting inside corrugated flexible conduit like this...
The pixel strip is around 12mm wide, the conduit I ordered is 20mm. Unfort thats the outer diameter therefore the pixel strip only JUST fits inside.
This is the property border, there will be approx 15m on the left side and approx 60-65m on the right side. I will use 1 output for the left side and one output for the right side.
Im trying to work out a way of having the pixel non-stop of course (data) but injecting power every 10m (2 strips).
For storage purposes as well as ease of installing Im looking at cutting the conduit into 10m lots, and feeding the strip through, injecting power at the ends but of course I have to keep the data running in one continuous length. Unfort null pixel may be likely?
Im really not sure how to go about it. This is what I have as per above.....
Output 1 - Univ 80 - 148px
Output 2 - Univ 81 - 127px
- Univ 82 - 170px
- Univ 83 - 161px
- Univ 84 - 136px
Any suggestions as to how to keep the strips running but add power inj with 2-wire connectors?
The pixel strip is around 12mm wide, the conduit I ordered is 20mm. Unfort thats the outer diameter therefore the pixel strip only JUST fits inside.
This is the property border, there will be approx 15m on the left side and approx 60-65m on the right side. I will use 1 output for the left side and one output for the right side.
Im trying to work out a way of having the pixel non-stop of course (data) but injecting power every 10m (2 strips).
For storage purposes as well as ease of installing Im looking at cutting the conduit into 10m lots, and feeding the strip through, injecting power at the ends but of course I have to keep the data running in one continuous length. Unfort null pixel may be likely?
Im really not sure how to go about it. This is what I have as per above.....
Output 1 - Univ 80 - 148px
Output 2 - Univ 81 - 127px
- Univ 82 - 170px
- Univ 83 - 161px
- Univ 84 - 136px
Any suggestions as to how to keep the strips running but add power inj with 2-wire connectors?