Same Universe Different IP

[tuppetsdad]

In my set up I have two DR4 E1.31 to DMX Interfaces. They have individual IP addresses and I am using Unicast. I have < 512 DMX addresses so would like to set them both for Universe 1 (1-512). Can you do this with XLights ?


Tuppetsdad 8)

 

[keithsw1111]

Yes.

 

[multicast]

In my set up I have two DR4 E1.31 to DMX Interfaces. They have individual IP addresses and I am using Unicast. I have < 512 DMX addresses so would like to set them both for Universe 1 (1-512). Can you do this with XLights ?


Tuppetsdad 8)

Dear TuppetsDad,

I am banging my head on the desk..

 

[dennismc]

Dear TuppetsDad,

I am banging my head on the desk..

Why?


Dennis the Menace

 

[tuppetsdad]

Thanks Keith issue is more that XLights auto numbers the X Lights mapping Channel and I have mapped all of them in the 1-512 range in the relevant XLight models. So if I add two DR4's as per 10.10.10.2 and 10.10.10.3 in attached pic then first one is 1-512 and the next 513- 1024. So do I need to re-address the models on the second DR4 or will they be OK.



(Andrew nice to see you are alive - how is your head)


Thanks
Tuppetsdad

 

[David_AVD]

Surely using unicast means that that universe can only ever go to one device (IP address) ?

I have 2 x DR4 in my display and I use multicast for the outputs (universes) that I want mirrored.

 

[keithsw1111]

If you want to mirror on the two controllers then you have to use multicast. You can't map the same xlights channels to 2 controllers. What you can do is define 2 universe 1s and send them to different controllers with different data. It's all in how you ask the question.