Setting up Mega Tree Settings (NOOB)

[Con124]

Hey fellas really sorry I am very new to this stuff but I’ve got my mega tree all ready to go, got x lights set up but really struggling to mimic my tree with the settings.

Here is a breakdown of my set up.

It’s 180 degree tree, with a star at the top.

Height 3700mm
Base 2000mm wide

Using 100 strands of pixels, there are 300 pixels connected to each port on the falcon controller

24 pixel strips at 2 inch spacing, with 75 pixels per strip.

What would be the correct configuration settings to use in x lights to match this?

#strings - ?
Nodes/String - ?
Strands/string - ?

Thanks in advance any help would be massive this is all between me and getting the tree going.

 

[Domestos]

Give this a go.

 

[Con124]

View attachment 27820
Give this a go.

Thanks legend

 

[Skymaster]

@Domestos has it spot on.
For an explanation:

# Strings- How many controller ports you have (6)
Nodes/String - How many pixels are connected to each port (300)
Strands/String - How many times one port zig-zags up and down the tree (300px / 75px) = 4

This would show
- That you have 24 total strips on the tree (4 strips * 6 ports)
- Your node count = 1800 (300 per port * 6 ports)........ which can be validated by strands * nodes/strand = 75 * 24 = 1800