Show us your control boxes & Control centers

Lujama Lights

Apprentice elf
Joined
Dec 6, 2017
Messages
86
I know there are a lot of little threads on this and i couldn't find a thread solely dedicated to showing of your work. I need some inspiration. Show & explain your control boxes & Control centers more photos the better
 

scamper

Dedicated elf
Joined
Jan 5, 2014
Messages
1,225
Location
collie
(3) Meanwell RSP3000-12 running in parallel, RSP3000-12, (6) RSP 320-12&24v, (2) F16v3 with Diff expansion. Its pretty much a power distribution center.View attachment 12613
That's just nuts! You need a nuclear reactor to power all that. :confused:
20160110_131922_001.jpg box.jpg medicine sm.jpg supply box1.jpg tree sm.jpg IMG_4978.JPG
These are old photos and most of the boxes have been modified since.
I have several around my yard. I paint them to look like presents :thumbsup:
 

LawrenceDriveLights

Senior elf
Joined
Jan 16, 2018
Messages
581
Here is a pic of my ammo box with controller for my Mega Tree (similar set up to what my youtube build videos are).

1 x Falcon F16 V3
2 x 12V PSU
2 x Falcon F8 Power Distro Boards (stacked one on top of the other).

View: https://www.dropbox.com/s/1ya8l5ss71niwx4/Photo%2025-4-18%2C%2010%2032%2028%20pm.jpg?dl=0
 

Lujama Lights

Apprentice elf
Joined
Dec 6, 2017
Messages
86
Nice work guys! Keep them comming! Some serious work gone into these
 

tom82

New elf
Joined
Mar 27, 2012
Messages
44
Location
Kew East, VIC
Here is a few from my show..

I have a number of power outlets around the exterior of the house switched together so the controllers come on around 8.15Pm and switch off at 12.00AM. All run back to a main switchboard (used for everything not just Christmas)

uIzWrXw.jpg

rWGd1rF


2016 Megatree controllers (x2) before the fans were installed. These boxes didn't turn out so well so have replaced for 2018 with a large metal switchboard box shown below..

2udojq3.jpg

bFMUYis


This is the new Megatree controller..... It contains;
4 x 600W PSUs / output voltage display
1 x 120W PSU for Fan and small DMX controller for tree star
2 x Pixlite 16s
1 x Ethernet switch with fibre uplink
Switchboard

I used an in-line blower fan with 100mm pipe to duct the hot air out of the enclosure
DX5lRJ9.jpg


This is the equipment rack in my switchboard room.... it has the show PC, ethernet switches, HDMI matrix for Virtual Santa, UPS and NAS for CCTV recording (among other things)


View: https://imgur.com/a/rPEerCm
 
Top