1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

using video as a transition in LSP

Discussion in 'LightShow Pro (LSP)' started by ScottyJ, Dec 18, 2014.

  1. ScottyJ

    ScottyJ New Elf

    Joined:
    Nov 19, 2012
    Messages:
    33
    Likes Received:
    0
    Location:
    Melbourne, FL
    Hey everyone
    I'm hoping someone can help me with this problem, I'm trying to take a 3.35 min video and use it as a transition but LSP keeps giving me a error saying there is problem with the file or configuration
    I've tried different codecs and resolutions, stripped the audio, even cut the video down into segments of 10 seconds but to avail
    Any help would be greatly appreciated


    Scott
     
  2. arw01

    arw01 Full Time Elf

    Joined:
    Dec 30, 2013
    Messages:
    384
    Likes Received:
    1
    Location:
    Eastern Washington
    try doing it as an AVI at 25 frames per second and 640x480 or down close to those settings.


    If you want to pm me a download location I can take a look at it and see if I can get a piece of it going, I make a fair number of from scratch pieces for my matrix words as I cannot make the other macros fill the whole matrix, they all scale from 10 pixels down to 7!
     
  3. OP
    OP
    ScottyJ

    ScottyJ New Elf

    Joined:
    Nov 19, 2012
    Messages:
    33
    Likes Received:
    0
    Location:
    Melbourne, FL
    Thanks for the reply arw01 I actually got it to work using Sony Vegas
     
  4. arw01

    arw01 Full Time Elf

    Joined:
    Dec 30, 2013
    Messages:
    384
    Likes Received:
    1
    Location:
    Eastern Washington
    Fancy piece of software!
     

Share This Page