1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

Wiring up Rays 10W RGB Floods

Discussion in 'RGB Lights - Intelligent Pixels and 3-Channel RGB' started by grungle25, Nov 22, 2012.

  1. grungle25

    grungle25 New Elf

    Joined:
    Dec 7, 2011
    Messages:
    46
    Likes Received:
    0
    Location:
    Darwin
    So after reading Kane's very helpful post on these floods I decided to get 5 of them and have a play. I have got them going nicely on the bench but now it's time to deploy. Just after anyone's advice on how they cable these floods up?

    2 wires for power and 3 for DMX so do you daisy chain the lot and split from one central point or go from one to the other? I guess it depends on location of the floods....mine will only be about 3 metres apart in a line.

    I am going to use one port of my ECG-D4 to control the 5 floods.

    Any advice would be appreciated!

    Cheers

    Glenn
     
  2. Superman

    Superman I Have C.L.A.P and its very infectious Global Moderator

    Joined:
    May 29, 2010
    Messages:
    1,627
    Likes Received:
    15
    Location:
    Ipswich-QLD
    Find Me On:
    Hi Grungle.

    yes use 5 wires 2 for power 3 for data. These are a nice little unit and work well.
    Daisy chained together and joined at each light.
     

Share This Page