Wiring up Rays 10W RGB Floods

grungle25

Apprentice elf
Joined
Dec 7, 2011
Messages
53
Location
Darwin
So after reading Kane's very helpful post on these floods I decided to get 5 of them and have a play. I have got them going nicely on the bench but now it's time to deploy. Just after anyone's advice on how they cable these floods up?

2 wires for power and 3 for DMX so do you daisy chain the lot and split from one central point or go from one to the other? I guess it depends on location of the floods....mine will only be about 3 metres apart in a line.

I am going to use one port of my ECG-D4 to control the 5 floods.

Any advice would be appreciated!

Cheers

Glenn
 

Superman

I Have C.L.A.P and its very infectious
Global moderator
Joined
May 29, 2010
Messages
1,778
Location
Ipswich-QLD
Hi Grungle.

yes use 5 wires 2 for power 3 for data. These are a nice little unit and work well.
Daisy chained together and joined at each light.
 
Top