Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That’s the one I just orderedHonestly I would just buy the knock-off meanwell supplies, they cost half as much as you can have a spare on the shelf - http://www.hansonelectronics.com.au/product/power-supply-s-400-12/
Thank you!!!Honestly I would just buy the knock-off meanwell supplies, they cost half as much as you can have a spare on the shelf - http://www.hansonelectronics.com.au/product/power-supply-s-400-12/
Bought one of them and it lasted 10 minutes before dying. Not sure what caused it's deathHonestly I would just buy the knock-off meanwell supplies, they cost half as much as you can have a spare on the shelf - http://www.hansonelectronics.com.au/product/power-supply-s-400-12/
Do you have any links explaining what extra work is involved and why I need to be braveIf you're brave, you could even use server power supplies, they do require a bit of extra work but they're usually cheap second hand and can supply huge power levels. Assuming you plan to use 12V lights.
I don't have any guides that I know of, but there are "breakout boards" that have been created for the most popular models, these either have screw terminals or plugs on a PCB that plugs into the PSU. More uncommon ones (most likely to be found cheap) will require searching online for the pinout to enable the PSU, from there you can use a multimeter to measure postive/negative, these are usually the biggest terminals or largest pieces of copper on the PCB that sticks out from the PSU.Do you have any links explaining what extra work is involved and why I need to be brave