Push Button Speaker Box with Built in FM Receiver - As presented at the Perth 2023 Mini

I’m using the 36v Meanwell to better power the amp I’m using. This amp has a bit more power and the recommended volts was, I believe, 24v-50v.
 
aimbrunone said:
Thanks for your patience!!

Ok. I’m going to get the buck converter and drop down to 12 or even 24. Found this item. https://a.co/d/027SHjCc

I also found this DPDT solid state relay. https://a.co/d/0e0FsZyd

I can override the push button by using this SPDT switch. https://a.co/d/0d8YAFWP

This is the push button relay I found for 36 v. https://a.co/d/0hgDYgcT

Will these products work as you described in your diagram?
Click to expand...
This is the timer relay I used https://www.amazon.com/JESSINIE-Tri...delay+timer+control+off+switch,aps,367&sr=8-3
This is the type of relay DPDT that I used with a bit of heatshrink over the connection https://www.jaycar.com.au/12v-dpdt-mini-pcb-relay/p/SY4061

and a up dated diagram
36 v supply.png
 
You must log in or register to reply here.
Back
Top