-
-
MMikeKrebs replied to the thread Wanting to make a 16x50 mega tree.Seed. but much higher density. You will appreciate it later when you want more density.
-
MMikeKrebs replied to the thread My New Home Made ESP32 WLED 8 Channel Controller..Nice job doing it yourself! Good luck with the controller.
-
MMikeKrebs replied to the thread Pebble seed colour issue.The pixlite doesn't really care except for running a test. In a show, it is just bytes of xx protocol. You might have to make sure the...
-
MMikeKrebs replied to the thread To Paint or not Paint your Props.Do you see the eyes at night? The two with the eyes up look odd at night? Or would you suggest keeping them below the lid? BTW - great...
-
MMikeKrebs replied to the thread Control turning on the Power supply with Pixelstick..@Martin Mueller You got another trick up your sleeve? It looks like this support was added a bit ago. You do have to flash it as a...
-
MThe biggest pain of any seed project I've worked on (MT, garage matrix, porch columns) has been terminating the strings. If Ray or...
-
MMikeKrebs replied to the thread Push Button Speaker Box with Built in FM Receiver - As presented at the Perth 2023 Mini.What are you trying to do? Having it on in one position and on in the other position sounds like you can skip the relay and just have it on?
-
MMikeKrebs reacted to Skymaster's post in the thread First controller setup and ready to roll! with
Like.
Just to expand on this - do NOT connect the DC Negative to the AC Ground/Earth. Keep the mains wiring completely separate from the DC... -
MMikeKrebs replied to the thread new member.Do you have the bullets? I would go seed for a new mega tree. You can get more density in both directions. 3 meters is nice length to...
-
MMikeKrebs replied to the thread Falcon v3 problem..Did you try to downgrade?
-
MMikeKrebs replied to the thread Which brand for quality / reliability?.One thing about aliexpress is that freight is usually a little high. Depending on the order size, ask for a quote and see if the freight...
-
MMikeKrebs replied to the thread Kulp K16 port2 not getting data or enough power?.You can try fixing while attached. I would pull 14 and 19 out and replace both 16 and 17 using a scotchlok or wagu style connector.
-
MMikeKrebs replied to the thread Joining 2 items together - Program wise.IIWM and I had 100 node strings, I would make 100 node trees. Maybe 7x10 or 5x14 and then your 30 node star. This eliminates the cut and...
-
MMikeKrebs replied to the thread Hi, North Tasmania!.Other than limiting the total number of pixels per port, you don't need to worry about setting up end to end displays in xlights. Just...
-
MMikeKrebs replied to the thread Flake 47 rev2.I downloaded flake 47 v2 and the picture looks right but the model layout data doesn't seem to match. You should contact Gilbert for help.
-
-
Loading…
-
Loading…