Recent content by jasp3r

I wound up getting it working. The issue is Vixen itself. Within the Text option I had to change it from String to Location and then it flipped and looked correctly. As of now everything is working but with that said I am a bit disappointed with Vixen and the lack of being able to move text...

Just an update. So I thought I would test this using xLights instead of Vixen and viola... it worked as expected. Now I just need to figure out why Vixen is doing this to the screen when xLights works. All of my current sequences are in vixen so I really do not feel like learning xLights at...

I have given up on the BBB option and moved to working with a colorlight option which has gotten me much closer and I would say I am 90% there but I need some additional assistance getting over the hump. New post with setup is here...

So I gave up on the option of using a BBB and FPP to drive my P10 panels. No matter what I tried I simply could not get it working. So instead I purchased a 51-75B Colorlight card. My matrix is setup as 4 wide x 4 tall so 128x64 I followed a couple videos online using this method and both...

Here you go. Bottom = 1 Top = 4 Going left to right from backside Bottom is where power is at as I just laid it down to take the photo

Thanks I sent you a PM.

Ok got that all figured out. LED sign turns on just like it did. Only difference is the panel layout is 180 from what it was. Same results as before however. At this point I am guessing it is something to do with the P10 panels themselves and not compatible with the BBB setup. Kind of sucks...

Ok so first off part of this was my issue I suppose just because I thought top left had to be number 1. Anyway I flipped my entire panel grid 180 degrees so the layout matches what you listed above. I restored the json you attached to mine and from what I could tell the only real difference...

Here you go. Hope this helps. Had to rename to .txt from .json in order to upload.

I had already tried that but I went ahead and gave it a shot again however the results did not change. Exact same look as before. Every 4 rows are opposite. I am 99% sure this has something to do with my panels the only problem is there are not very many options to change things up via FPP...

here is what the items look like and now it makes sense knowing that every 4 rows move opposite direction.

Buzzdude, Thanks for offering some help. here are some photos of my current configuration. Below are configurations from my BBB FPP player and vixen. I tried both Vixen and xLights with same results. I also have a Linsn board but I havent messed with it yet but I read it can be used if you...

I have been working to get P10 panels working with my BBB running FPP. I have taken all the way down to just a single P10 16x32 matrix. Test run fine and colors are correct but when I try to do a simple sequence from Vixen or Xlights the results are the same I am trying to display color bars...