Push Button Speaker Box with Built in FM Receiver - As presented at the Perth 2023 Mini

I’m using the 36v Meanwell to better power the amp I’m using. This amp has a bit more power and the recommended volts was, I believe, 24v-50v.
 
aimbrunone said:
Thanks for your patience!!

Ok. I’m going to get the buck converter and drop down to 12 or even 24. Found this item. https://a.co/d/027SHjCc

I also found this DPDT solid state relay. https://a.co/d/0e0FsZyd

I can override the push button by using this SPDT switch. https://a.co/d/0d8YAFWP

This is the push button relay I found for 36 v. https://a.co/d/0hgDYgcT

Will these products work as you described in your diagram?
Click to expand...
This is the timer relay I used https://www.amazon.com/JESSINIE-Tri...delay+timer+control+off+switch,aps,367&sr=8-3
This is the type of relay DPDT that I used with a bit of heatshrink over the connection https://www.jaycar.com.au/12v-dpdt-mini-pcb-relay/p/SY4061

and a up dated diagram
36 v supply.png
 
Very much appreciated!! Super helpful. I may need to look for a dpdt from a different company. It looks like the one you suggested won’t ship to the United States.
 
aimbrunone said:
Found it! Sure called Latest Buy!
Click to expand...
Finally received the dpdt yesterday! Terminals look a bit different from the diagram you posted. Would you be able to help? Here is a pic of the dpdt.
 

Attachments

  • IMG_8274.jpeg
    IMG_8274.jpeg
    714.1 KB · Views: 9
  • IMG_8273.jpeg
    IMG_8273.jpeg
    643.3 KB · Views: 9
Thought I would post some pics of the finished product. Big thanks to Croydon Lights for all the help!!!
 

Attachments

  • IMG_8484.jpeg
    IMG_8484.jpeg
    1.1 MB · Views: 13
  • IMG_8485.jpeg
    IMG_8485.jpeg
    1,017.6 KB · Views: 13
Everything is working but the timer relay gets really hot really quick and then will shut down. Not sure what to troubleshoot. Step down is doing its job going from 36v to 12v. All connections look good. Any thoughts?
 
You must log in or register to reply here.
Back
Top