2 Wire pixels work with Advatek Mk2 pixlite16 - led type -QED3310 light strings

[LightmeupAucklandNZ]

Anyone heard of QED3310 Leds?
I came across them while searching Alibaba.
Im wondering how each led can be controlled from each other when there is only 2 wires going to each led. I have been trying to search the web about them and nothing comes up. Im waiting for supplier to reply now.

 

[David_AVD]

Might be a similar technology to the ones in this thread?

 

[LightmeupAucklandNZ]

Might be a similar technology to the ones in this thread?

I think these are different.

 

[LightmeupAucklandNZ]

Im waiting for the seller to get back to me. Im wondering if each led gets programmed and set before its added onto the strand but then they say you can connect multiple sets together so i don’t understand how the controller will know what leds to control or how many leds are on the strand. Or is it when the sets powered on the controller assignes a number for each led so it can control them individually?

 

[LightmeupAucklandNZ]

Link to the lights from the seller


View: https://youtu.be/meEIAYLY4VU

 

[LightmeupAucklandNZ]

Check out this product on Alibaba App High quality rubber wire led string fairy light with smart rgb colorful twinkle led remote
https://m.alibaba.com/product/16000...terKey":"7.8.2_share","cacheTime":"1800000"}}

 

[David_AVD]

If you want to send me one I'll take a look at it.

 

[LightmeupAucklandNZ]

3 Channel LED Driver IC with constant Current single wire Interface is what i have found looking online. Im still waiting for supplier to reply they just got to work.

 

[LightmeupAucklandNZ]

If you want to send me one I'll take a look at it.

Yes once i get some im just going to order a few sets because they seem interesting. Ill let you know

 

[LightmeupAucklandNZ]

If you want to send me one I'll take a look at it.

Found out something about these pixels. They will work with a advatek controller. When connecting the pixels first time to the controller only the first pixels lights. It then goes through and gives each pixel there there address. So looks like these 2 wire pixels will work with advatek pixlite Mk2

heres a link below

https://www.advateklights.com/knowledge-base/qed3001

 

[David_AVD]

So are these pixels really 2 wire? If so, how can you connect them to a 3 wire output on a pixel controller?

 

[LightmeupAucklandNZ]

So are these pixels really 2 wire? If so, how can you connect them to a 3 wire output on a pixel controller?

I fort the same way. But it seems they have a extra box that was pixel data in. Im waiting for supplier to get back to me

 

[tooms]

https://translate.google.com/transl...om/newsdetail_891279.html&prev=search&pto=aue

 

[David_AVD]

So those pixels are 2-wire (modulated data on power) but would still need something to convert the power and data from a standard pixel controller.

 

[Saman_Deev]

I've just received some after being intrigued by this post.Apparently the 3110s are using a different chip to the 3001s (the 3001s are I think intercompatible with the tls3001 pixels). As for the 3110s, I honestly have no idea whether they would work with the PixLite controllers. The website says (after google translate) that they can ship a DMX transcoder with them, which is what I got when I bought some. There seems to be very little information about them. All i can get them to do is boot do a "demo" sequence where they just cycle through a bunch of colours. The outputs on the "DMX transcoder" are labelled GND, D-, D+ (with 2 unsoldered connections Din, Dout). I have no idea how to hook these up. I suspect though the transcoders take in a UCS512 esque signal which is differential.

I am struggling to find a pixel controller that outputs a differential signal usable with these.

QED3110系列产品，LED全彩RGB灯珠，-LED产品-商城-深圳市质能达微电子科技有限公司