As I guess a few of you know I have a few strobes to assemble. Before I get too carried away assembling lots of these I need to know in which mode they need to be assembled. All of the ones that I have assembled have been fully loaded boards with the exception of most of the ones I did for Superman that I didn't put the leds on. I don't know the modes that having fully loaded boards limits you to or in what modes the end user wants to use the leds in. There is info in the wiki on how the strobes run but unless I'm told different all the boards will get fully loaded. This includes the 2ohm or 2.2ohm resistor which suits the 350mA 1W leds. The leds will be mounted inline with the pcb and no wires will be fitted. Any boards that aren't to be programmed will be visually inspected and a random selection of a few will be programmed up and tested. Any boards that are to be programmed will be fully tested as they start blinking as soon as they are programmed. There are maybe 6 different hex files which provide a more random firing pattern when used as a group. Anyone who wants multiple hex files used then I'll need to know and the boards will get marked with a 1 to 6 to indicate which hex is in which board.
Before I assemble the boards (except for Supermans whose were done months ago and Kels that I've already done) I need each person to confirm that they want the boards fully assembled or what option (see wiki) and that any that are getting programmed how many hex file firmwares they want.
Payment is to be made to my paypal account the details of which will be sent via PM to each of the people on the list.
Postage will be a flat $11.30 to anywhere in Aus and will be for a 500g or 3kg satchel post which is a couple days to anywhere in Aus. If registered mail or express post is required then let me know and I'll adjust the cost and postage.
Boards will be sent as soon as they are done and payment is made. At this stage I'm hoping to recieve all the parts on 17th July and get them all shipped by the 20th or 21st.
Payment breakdown is $20 per panel of 45 strobes to be assembled. $5 per panel of 45 that require programming. $11.30 freight to Australian addresses.
Please confirm via forum post and/or PM that assembly level, number of assembled panels and programming options are correct. Total costs will be updated as info is confirmed.
Hopefully I'll find some wiki or forum links with info about firmwares and assembly options and I'll edit them in here.
http://auschristmaslighting.com/wiki_source/images/7/7f/Assembling_TPR1-Strobe.pdf
http://auschristmaslighting.com/forums/index.php/topic,807.0.html
The fully loaded boards will look like the 1st page of the above pdf with the exception that the wires and covers won't be fitted.
[attachimg=2]
Before I assemble the boards (except for Supermans whose were done months ago and Kels that I've already done) I need each person to confirm that they want the boards fully assembled or what option (see wiki) and that any that are getting programmed how many hex file firmwares they want.
Payment is to be made to my paypal account the details of which will be sent via PM to each of the people on the list.
Postage will be a flat $11.30 to anywhere in Aus and will be for a 500g or 3kg satchel post which is a couple days to anywhere in Aus. If registered mail or express post is required then let me know and I'll adjust the cost and postage.
Boards will be sent as soon as they are done and payment is made. At this stage I'm hoping to recieve all the parts on 17th July and get them all shipped by the 20th or 21st.
Payment breakdown is $20 per panel of 45 strobes to be assembled. $5 per panel of 45 that require programming. $11.30 freight to Australian addresses.
Please confirm via forum post and/or PM that assembly level, number of assembled panels and programming options are correct. Total costs will be updated as info is confirmed.
Hopefully I'll find some wiki or forum links with info about firmwares and assembly options and I'll edit them in here.
http://auschristmaslighting.com/wiki_source/images/7/7f/Assembling_TPR1-Strobe.pdf
http://auschristmaslighting.com/forums/index.php/topic,807.0.html
The fully loaded boards will look like the 1st page of the above pdf with the exception that the wires and covers won't be fitted.
[attachimg=2]